SolarTide
SolarTide Solar Pool Ionizer Purifier are suitable for both residential and commercial applications.
SolarTide SPI series of the solar pool ionizer is a new revolutionary water purifier for the Algae-free and Chemical-free operation of your swimming pool. It uses solar technology to generate a safe, low voltage trickle feed of solar generated electricity to ionize the minerals copper ions into the water. In order to restrain the growth of algae and microorganisms.
● Kill Algae and Reduce the need of Chlorine.
● Save your time for Algae-scrubbing.
● Reduces Chlorine consumption by up to 80% and saves $300-$800 per year in chemicals alone.
● Say goodbye to Algaecides and toxic Chemicals.
● Recommended for pools up to 150 M3.
● Works with all Pools & SPAs, In-ground, above-ground, saltwater, and chlorine pools.
● Reduce eye and skin irritation caused by chlorine and other chemicals.
● LED indicator shows when the device is working.
● Lifetime warranty.
Step 1: Let the Solar pool ionizer simply floats in the pool, make sure it under the sunlight.
Step 2: The solar panel converts sunlight into low voltage harmless electricity. The electrical current energies the anode releases mineral Cu ions into the water. Also the LED lights up.
Step 3: The Ionized water could inhibit the growth of microorganism and algae in pool. The solar pool ionizer also collects undesirable minerals such as calcium and iron. It has the effect of softening your water.
| Test Item | Pool before Treatment | Pool after Treatment |
| Total Coli from Group, MPN/100ml | 9.2 *106 | <2 |
| Total Number of Bacterial Colony, CFU/ml | 1.3 * 106 | 120 |
| Copper, mg/L | 0.008 | 0.921 |
| PH | 7.82 | 7.12 |
| Temperature (Centigrade) | 21 | 21 |
| Total Alkalinity as(Calcium Carbonate), mg/L | 105 | 83 |
| Free Residual Chlorine, mg/L | < 0.53 | < 0.05 |
| Cah (Calcium Carbonate), mg/L | 135 | 123 |
| Model | SPI-900 |
| Diameter | 235mm |
| Height | 185mm |
| Weight | 1.20kgs/pc |
| Solar PV Panel Type | Monocrystalline |
| Panel Power | 2.8 Watt |
| Panel Volt | 6 V |
| Panel thickness | 2mm |
| Panel diameter | 150mm |
| Copper Anode Weight | 480g |
| Copper Anode Diameter | 25mm |
| Copper Anode Length | 105mm |
| Coil Material | Stainless steel 304-BA |
| Mesh Basket | PE material |
| ITEM | CHLORINE | SPI-900 |
Harmful to Eyes Causes redness and irritation | YES | NO |
Respiratory Problems
Can cause lung-related toxicity | YES | NO |
Harmful for Environment Combines to form dioxins that pollute | YES | NO |
Bleaches Swimwear Wears clothing 20X faster | YES | NO |
Reduces Equipment Life Erodes plastic and rubber parts | YES | NO |
Deteriorates Vinyl Liners Breakdown resins used to make liner | YES | NO |
The SPI-900 Solar Ionizer prevents algae in pools up to 150,000 Liters. Also depends on your local water quality and weather condition.
The copper anode for the SPI-900 Solar Ionizer lasts approximately one year, depending on weather and water conditions.
The SPI-900 Solar Ionizer needs at least 4-5 hours of sunlight. If the ionizer is not in the sun, it will not work. Therefore, you may need to tether it to the tethering hole which on the side of the ionizer and keep it in the sun.
You will need to clean the copper anode every seven days, otherwise build up may occur in the basket preventing the minerals being released in the water properly. Also, this may cause a tear in the basket.
It is not necessary, nor desirable. The solar ionizer is allowed to float every day at the first weeks, to obtain the concentration of ions. Check the copper level weekly, If excess 0.9 ppm, take it out from the pool, or water will turn cloudy and green. And put it back to the pool when less than 0.5 ppm.
